Vibra-Tite VC3 Threadlock - 5ml tube
Sales price £9.00
Description
The 5ml re-usable tube is sufficient for 5/6 applications to a set of binding screws plus a few spares.
Simply coat the end 4/5mm of the mounting screws in the VC-3 solution & leave to completely dry (approx 5 mins) before installation. The screws can then be kept in a bag in your tool kit when travelling etc. The screws may be un- and re-installed several times without reapplication. Don't be concerned when you first remove the screws and it appears that there's not much of the VC-3 on the threads as it will now be in the insert.
Quiver Killer only certifies the use of Vibra-TITE VC3 antivibration threadlock to secure the M5 mounting screws into the Quiver Killer inserts. VC-3 is a non-anaerobic formula that is benign to all plastics.
The 5ml re-usable tube is sufficient for 5/6 applications to a set of binding screws plus a few spares.
Simply coat the end 4/5mm of the mounting screws in the VC-3 solution & leave to completely dry (approx 5 mins) before installation. The screws can then be kept in a bag in your tool kit when travelling etc. The screws may be un- and re-installed several times without reapplication. Don't be concerned when you first remove the screws and it appears that there's not much of the VC-3 on the threads as it will now be in the insert.
IMPORTANT NOTICE REGARDING THE USE OF LOCTITE:
Loctite is very harmful to some of the plastics of which bindings are composed and if it comes in to contact with such the plastic will fail within a short period of time and without any signs of there being an issue. For this reason Quiver Killer only certifies the use Vibra-TITE VC-3 threadlock which is a non-anaerobic formula that is benign to all plastics.
Login Form
Shopping cart
Cart empty