Quiver Killer Pro Installation Kit
Sales price £64.00
Description
The Quiver Killer Pro installation tool set is designed for the installation of QK binding inserts by trade worskshops using a mounting jig but it's also recommended for high volume DIY installers due the higher durability of the tools.
The set is exclusively made for Quiver Killer by one of the world's leading tool manufacturers.
The set comprises of the following, all of which are sized for mounting jig use:
- Custom ground and honed step drill bit
- Ground bottom tap
- Installation tool
The installation tool has a bind-free tapered thread so doesn't need locking nuts however two locking nuts are included just in case.
Also required but not included is a waterproof flexible epoxy adhesive (Araldite 2011 Standard Precision) to bond/seal the inserts in the ski & Vibra-Tite VC3 threadlock.
IMPORTANT NOTICE REGARDING THE USE OF LOCTITE
Loctite may be harmful to some of the plastics of which bindings are composed. For example, 22 Designs specifically forbids the use of Loctite with their telemark bindings.
For this reason Quiver Killer only recommend the use Vibra-tite VC-3 which is a non-anaerobic formula that is benign to all plastics. Paint the solution onto the end 3/4mm of the mounting screws & leave to dry before installation. The screws may be un- and re-installed several times without reapplication.
The set is exclusively made for Quiver Killer by one of the world's leading tool manufacturers.
The set comprises of the following, all of which are sized for mounting jig use:
- Custom ground and honed step drill bit
- Ground bottom tap
- Installation tool
The installation tool has a bind-free tapered thread so doesn't need locking nuts however two locking nuts are included just in case.
Also required but not included is a waterproof flexible epoxy adhesive (Araldite 2011 Standard Precision) to bond/seal the inserts in the ski & Vibra-Tite VC3 threadlock.
IMPORTANT NOTICE REGARDING THE USE OF LOCTITE
Loctite may be harmful to some of the plastics of which bindings are composed. For example, 22 Designs specifically forbids the use of Loctite with their telemark bindings.
For this reason Quiver Killer only recommend the use Vibra-tite VC-3 which is a non-anaerobic formula that is benign to all plastics. Paint the solution onto the end 3/4mm of the mounting screws & leave to dry before installation. The screws may be un- and re-installed several times without reapplication.
Login Form
Shopping cart
Cart empty